Reach Truck Battery

Wattrae Energy 51.2V 280Ah LiFePO4 Battery for Electric Reach Truck

Wattrae Energy 51.2V 280Ah lithium battery for Electric Reach Truck. A lead-acid replacement solution with BMS, tray matching, connector and charger support.

Key specifications

Voltage: 48V
Capacity: 280 Ah
Dimensions: Customized to forklift battery compartment (unit: mm). Drawing confirmation required.
Weight: 140 kg
Ballast: —
Connector: —
BMS: —
Charger: WTE512280-326
Warranty: —

Get a Quote Back to products

Description

Wattrae Energy 51.2V 280Ah LiFePO4 traction battery is engineered for Electric Reach Truck. It is prepared for lead-acid to lithium conversion projects with matched tray sizing, BMS protection, connector options, and charger support.

Lead-Acid to Lithium Replacement Overview

This 51.2V 280Ah lithium traction battery is positioned for fleets that want to replace flooded or sealed lead-acid batteries without changing the core truck workflow. The conversion should confirm voltage, battery compartment size, connector type, cable direction, counterweight requirement, charger profile, and communication needs before installation.

Designed for Electric Reach Truck and similar industrial electric equipment.
Supports opportunity charging and lower routine maintenance compared with lead-acid packs.
Uses integrated BMS protection for over-charge, over-discharge, over-current, temperature, and short-circuit control.
Can be matched with REMA, Anderson, or project-specific connectors and a compatible lithium charger.
Tray size, ballast weight, cable outlet, SOC display, and CAN communication can be configured for the conversion project.

Key Specifications

Product Brand	Wattrae Energy
Compatible Equipment Brand	Custom / OEM equipment
Application	Electric Reach Truck
Voltage	51.2V
Capacity	280Ah
Energy	14.34 kWh
Dimensions	Customized to forklift battery compartment (unit: mm). Drawing confirmation required.
Weight	≈ 140 kg (without counterweight)
Cell Chemistry	LiFePO 4 / Prismatic(Lithium Iron Phosphate)
Recommended Charger	WTE512280-326

Detailed Specifications

Model	WTE512280-326
Nominal Voltage	51.2 V
Nominal Capacity (@0.2C)	280 Ah
Nominal Energy	14.34 kWh
Cell Chemistry / Type	LiFePO 4 / Prismatic(Lithium Iron Phosphate)
Cell Combination	1P16S (280 Ah)
Recommended Charging Voltage	58.4 V (max.)
Max. Charging Current	200 A
Discharging Cut-off Voltage	40 V
Max. Continuous Discharging Current	200 A
Max. Pulse Discharging Current	300 A, ≤ 30 s
Self-discharge Rate	≤ 4% in the first month after full charge; ≤ 1% per month thereafter
Cycle Life (25 ℃, 0.5C/0.5C, 80% DOD)	≥ 3500 cycles
Dimensions (L×W×H)	Customized to forklift battery compartment (unit: mm). Drawing confirmation required.
Weight	≈ 140 kg (without counterweight)
Communication Interface	CAN; cloud platform features available (remote monitoring, fault logs, SOC).
Charge Temperature	0 ℃ to 55 ℃ (32 ℉ to 131 ℉)
Discharge Temperature	-20 ℃ to 60 ℃ (-4 ℉ to 140 ℉)
Storage Temperature	0 ℃ to 45 ℃ (32 ℉ to 113 ℉)
Safety Standard	UN38.3, CE, IEC, CB, ISO9001
Water & Dust Resistance	IP54
Application	Electric Reach Truck Forklift LiFePo4 Battery
Voltage	51.2V
Capacity	280 Ah
Energy	14.34 kWh
Design Life	> 10 years
Forklift Type	Electric Reach Truck
Recommended Charger Model	48V 100A-150A
Lead-acid Code	24-85-7
Compatible Brands	Toyota, Heli, Linde, Still, Komatsu, Sumitomo, Mitsubishi, TCM, etc

Lead-Acid Conversion Plan

Record the existing lead-acid battery voltage, capacity, tray dimensions, weight, connector, cable exit direction, and truck model.
Select a Wattrae Energy lithium pack with the correct system voltage, usable energy, BMS current rating, and required counterweight.
Confirm charger compatibility, charging voltage, maximum current, connector standard, and any CAN or SOC display requirements.
Install the battery in the tray, secure cables, verify polarity, test charger handshake, and run a controlled discharge/charge check.
Train operators on opportunity charging, SOC reading, storage, and fault-code handling.

SEO FAQ

Can this battery replace a lead-acid forklift battery?

Yes, it can be used as a lead-acid replacement when voltage, tray size, weight balance, connector, charger settings, and discharge current are matched to the equipment.

Does the conversion need a new charger?

A lithium-compatible charger is recommended. The charger should match the battery charging voltage, current limit, connector, and BMS communication requirements.

Can the tray size and counterweight be customized?

Yes. For many forklift, pallet truck, reach truck, and tow tractor projects, tray dimensions, ballast weight, connector, cable outlet, and display options can be configured.

What information is needed before ordering?

Provide the truck model, existing lead-acid battery code, voltage, capacity, tray size, battery weight, connector photo, charger details, and operating duty cycle.