Forklift Battery
Forklift Battery
Wattrae Energy 38.4V 912Ah LiFePO4 Battery for Hyster E45Z
Wattrae Energy 38.4V 912Ah lithium battery for Hyster E45Z. A lead-acid replacement solution with BMS, tray matching, connector and charger support.
Key specifications
- Voltage
- 36V
- Capacity
- 912 Ah
- Dimensions
- 878*695*613 mm / 34.5*33.6*30.8 inch
- Weight
- 1200 kg
- Ballast
- —
- Connector
- —
- BMS
- —
- Charger
- 36V 200A
- Warranty
- —
Description
Wattrae Energy 38.4V 912Ah LiFePO4 traction battery is engineered for Hyster E45Z. It is prepared for lead-acid to lithium conversion projects with matched tray sizing, BMS protection, connector options, and charger support.
Lead-Acid to Lithium Replacement Overview
This 38.4V 912Ah lithium traction battery is positioned for fleets that want to replace flooded or sealed lead-acid batteries without changing the core truck workflow. The conversion should confirm voltage, battery compartment size, connector type, cable direction, counterweight requirement, charger profile, and communication needs before installation.
- Designed for Hyster E45Z and similar industrial electric equipment.
- Supports opportunity charging and lower routine maintenance compared with lead-acid packs.
- Uses integrated BMS protection for over-charge, over-discharge, over-current, temperature, and short-circuit control.
- Can be matched with REMA, Anderson, or project-specific connectors and a compatible lithium charger.
- Tray size, ballast weight, cable outlet, SOC display, and CAN communication can be configured for the conversion project.
Key Specifications
| Product Brand | Wattrae Energy |
|---|---|
| Compatible Equipment Brand | Custom / OEM equipment |
| Application | Hyster E45Z |
| Voltage | 38.4V |
| Capacity | 912Ah |
| Energy | 35.02 kWh |
| Dimensions | 878*695*613 mm / 34.5*33.6*30.8 inch |
| Weight | 1200KG/2643 lb |
| Cell Chemistry | LiFePO 4 / Prismatic(Lithium Iron Phosphate) |
| Recommended Charger | 36V 200A |
Detailed Specifications
| Model | WTE-807 |
|---|---|
| Nominal Voltage | 38.4 V |
| Nominal Capacity (@0.2C) | 912Ah |
| Nominal Energy | 35.02 kWh |
| Cell Chemistry / Type | LiFePO 4 / Prismatic(Lithium Iron Phosphate) |
| Cell Combination | 3P12S (304 Ah) |
| Recommended Charging Voltage | 42 V (max.) |
| Max. Charging Current | 200 A |
| Discharging Cut-off Voltage | 40 V |
| Max. Continuous Discharging Current | 200 A |
| Max. Pulse Discharging Current | 300 A, ≤ 30 s |
| Self-discharge Rate | ≤ 4% in the first month after full charge; ≤ 1% per month thereafter |
| Cycle Life (25 ℃, 0.5C/0.5C, 80% DOD) | ≥ 3500 cycles |
| Dimensions (L×W×H) | 878*695*613 or Customized. |
| Weight | ≈ 1200 kg (with counterweight) |
| Communication Interface | CAN; cloud platform features available (remote monitoring, fault logs, SOC). |
| Charge Temperature | 0 ℃ to 55 ℃ (32 ℉ to 131 ℉) |
| Discharge Temperature | -20 ℃ to 60 ℃ (-4 ℉ to 140 ℉) |
| Storage Temperature | 0 ℃ to 45 ℃ (32 ℉ to 113 ℉) |
| Safety Standard | UN38.3, CE, IEC, CB, ISO9001 |
| Water & Dust Resistance | IP54 |
| Application | Hyster E45Z |
| Voltage | 38.4 V |
| Capacity | 912 Ah |
| Energy | 35.02 kWh |
| Dimensions(LxWxH) | 878*695*613 mm / 34.5*33.6*30.8 inch |
| Standard Weight | 1200KG/2643 lb |
| Design Life | > 10 years |
| Forklift Type | Hyster E45Z |
| Recommended Charger Model | 36V 200A |
| Design Code | WTE384912 -108 |
| Customized | Yes |
Lead-Acid Conversion Plan
- Record the existing lead-acid battery voltage, capacity, tray dimensions, weight, connector, cable exit direction, and truck model.
- Select a Wattrae Energy lithium pack with the correct system voltage, usable energy, BMS current rating, and required counterweight.
- Confirm charger compatibility, charging voltage, maximum current, connector standard, and any CAN or SOC display requirements.
- Install the battery in the tray, secure cables, verify polarity, test charger handshake, and run a controlled discharge/charge check.
- Train operators on opportunity charging, SOC reading, storage, and fault-code handling.
SEO FAQ
Can this battery replace a lead-acid forklift battery?
Yes, it can be used as a lead-acid replacement when voltage, tray size, weight balance, connector, charger settings, and discharge current are matched to the equipment.
Does the conversion need a new charger?
A lithium-compatible charger is recommended. The charger should match the battery charging voltage, current limit, connector, and BMS communication requirements.
Can the tray size and counterweight be customized?
Yes. For many forklift, pallet truck, reach truck, and tow tractor projects, tray dimensions, ballast weight, connector, cable outlet, and display options can be configured.
What information is needed before ordering?
Provide the truck model, existing lead-acid battery code, voltage, capacity, tray size, battery weight, connector photo, charger details, and operating duty cycle.
Compatible brands
- HYSTER
Related products
Forklift Battery
Wattrae Energy 83.2V 410Ah LiFePO4 Battery for TOYOTA 8FBN30 Counterbalanced Forklift
Forklift Battery