Forklift Battery
Forklift Battery
Wattrae Energy 51.2V 404Ah LiFePO4 Battery for Hyster J1.75EX Forklift
Wattrae Energy 51.2V 404Ah lithium battery for Hyster J1.75EX Forklift. A lead-acid replacement solution with BMS, tray matching, connector and charger.
Key specifications
- Voltage
- 48V
- Capacity
- 404 Ah
- Dimensions
- 980*465*780mm/38.59×18.31×30.71 inch
- Weight
- 810 kg
- Ballast
- —
- Connector
- Anderson SB175 (Gray) / REMA 160A
- BMS
- —
- Charger
- WTE512404-786
- Warranty
- —
Description
Wattrae Energy 51.2V 404Ah LiFePO4 traction battery is engineered for Hyster J1.75EX Forklift. It is prepared for lead-acid to lithium conversion projects with matched tray sizing, BMS protection, connector options, and charger support.
Lead-Acid to Lithium Replacement Overview
This 51.2V 404Ah lithium traction battery is positioned for fleets that want to replace flooded or sealed lead-acid batteries without changing the core truck workflow. The conversion should confirm voltage, battery compartment size, connector type, cable direction, counterweight requirement, charger profile, and communication needs before installation.
- Designed for Hyster J1.75EX Forklift and similar industrial electric equipment.
- Supports opportunity charging and lower routine maintenance compared with lead-acid packs.
- Uses integrated BMS protection for over-charge, over-discharge, over-current, temperature, and short-circuit control.
- Can be matched with REMA, Anderson, or project-specific connectors and a compatible lithium charger.
- Tray size, ballast weight, cable outlet, SOC display, and CAN communication can be configured for the conversion project.
Key Specifications
| Product Brand | Wattrae Energy |
|---|---|
| Compatible Equipment Brand | Hyster |
| Application | Hyster J1.75EX Forklift |
| Voltage | 51.2V |
| Capacity | 404Ah |
| Energy | 20.68 kWh |
| Dimensions | 980*465*780mm/38.59×18.31×30.71 inch |
| Weight | 810KG/1785lb |
| Cell Chemistry | LiFePO 4 / Prismatic(Lithium Iron Phosphate) |
| Recommended Charger | WTE512404-786 |
| Connector | Anderson SB175 (Gray) / REMA 160A |
Detailed Specifications
| Model | WTE512404-786 |
|---|---|
| Nominal Voltage | 51.2 V |
| Nominal Capacity (@0.2C) | 404 Ah |
| Nominal Energy | 20.68 kWh |
| Cell Chemistry / Type | LiFePO 4 / Prismatic(Lithium Iron Phosphate) |
| Cell Combination | 2P16S (202 Ah) |
| Recommended Charging Voltage | 58.4 V (max.) |
| Max. Charging Current | 200 A |
| Discharging Cut-off Voltage | 40 V |
| Max. Continuous Discharging Current | 200 A |
| Max. Pulse Discharging Current | 300 A, ≤ 30 s |
| Self-discharge Rate | ≤ 4% in the first month after full charge; ≤ 1% per month thereafter |
| Cycle Life (25 ℃, 0.5C/0.5C, 80% DOD) | ≥ 3500 cycles |
| Dimensions (L×W×H) | 980*465*780mm or Customized.. |
| Weight | ≈ 810 kg (with counterweight) |
| Communication Interface | CAN; cloud platform features available (remote monitoring, fault logs, SOC). |
| Charge Temperature | 0 ℃ to 55 ℃ (32 ℉ to 131 ℉) |
| Discharge Temperature | -20 ℃ to 60 ℃ (-4 ℉ to 140 ℉) |
| Storage Temperature | 0 ℃ to 45 ℃ (32 ℉ to 113 ℉) |
| Safety Standard | UN38.3, CE, IEC, CB, ISO9001 |
| Water & Dust Resistance | IP54 |
| Application | Hyster J1.75EX Forklift |
| Voltage | 51.2 V |
| Capacity | 404 Ah |
| Energy | 20.68 kWh |
| Dimensions(LxWxH) | 980*465*780mm/38.59×18.31×30.71 inch |
| Standard Weight | 810KG/1785lb |
| Design Life | > 10 years |
| Forklift Type | Hyster J1.75EX Forklift |
| Recommended Charger Model | 58.4V 80–100A Intelligent LiFePO4 Charger |
| Connector | Anderson SB175 (Gray) / REMA 160A |
Lead-Acid Conversion Plan
- Record the existing lead-acid battery voltage, capacity, tray dimensions, weight, connector, cable exit direction, and truck model.
- Select a Wattrae Energy lithium pack with the correct system voltage, usable energy, BMS current rating, and required counterweight.
- Confirm charger compatibility, charging voltage, maximum current, connector standard, and any CAN or SOC display requirements.
- Install the battery in the tray, secure cables, verify polarity, test charger handshake, and run a controlled discharge/charge check.
- Train operators on opportunity charging, SOC reading, storage, and fault-code handling.
SEO FAQ
Can this battery replace a lead-acid forklift battery?
Yes, it can be used as a lead-acid replacement when voltage, tray size, weight balance, connector, charger settings, and discharge current are matched to the equipment.
Does the conversion need a new charger?
A lithium-compatible charger is recommended. The charger should match the battery charging voltage, current limit, connector, and BMS communication requirements.
Can the tray size and counterweight be customized?
Yes. For many forklift, pallet truck, reach truck, and tow tractor projects, tray dimensions, ballast weight, connector, cable outlet, and display options can be configured.
What information is needed before ordering?
Provide the truck model, existing lead-acid battery code, voltage, capacity, tray size, battery weight, connector photo, charger details, and operating duty cycle.
Compatible brands
- HYSTER
Related products
Forklift Battery
Wattrae Energy 83.2V 410Ah LiFePO4 Battery for TOYOTA 8FBN30 Counterbalanced Forklift
Forklift Battery